Combining high performance, increased cutting capacity and improved durability, the SDT-710SR is the de facto standard of the SDT-710 series. Driving the 7" blade is a patented 1 HP carbon brush motor which delivers enough torque to handle virtually any tile job with relative ease. The power is complemented by a generous cutting capacity, that allows for cutting lengths of up to 20" straight and 14" diagonal. This unit is ideal for contractors in need of an affordable, portable wet tile saw, capable of performing on a par with heavy-duty saws but at a fraction of their weight.
|
 |
 |
|
|
|
| Saw Type |
|
|
Tile |
| Motor |
|
|
115 V/60 Hz |
| Horsepower |
|
|
1 HP |
| Blade Capacity |
|
|
6"~7" |
| Blade Arbor |
|
|
5/8" |
| RPM |
|
|
6000 |
| Weight |
|
|
55 lbs |
| Cutting Depth |
|
|
1-3/4" |
| Rip Cutting |
|
|
20" |
| Diagonal Cutting |
|
|
14" x 14" |
| Thermal Protection |
|
|
Equipped |
| ABS Water Tray |
|
|
Equipped |
| LCBH |
|
|
Equipped |
|
 |
|
|
|
|
|
 |
Click on  to see a close-up of the Feature |
|
 |
Water Pump
A high-output water pump provides sufficient cooling water flow for maximum protection of the diamond blade.
|
|
ABS Water Tray
The provided ABS water tray is durable, yet lightweight, which helps minimize the saw's overall weight.
|
|
Adjustable Cutting Height
Cutting depth can be easily adjusted to accommodate 6" to 7" blades and to provide plunge cutting functionality.
|
|
Thermal Overload Protection
Automatic thermal overload protection prevents the motor from overheating and protects the saw from power surges.
|
|
Carbon Brush Motor
The equipped carbon brush motor generates a tremendous amount of torque, surpassing that of a comparably rated induction motor. At the same time, it is also lighter and smaller than its induction counterpart, which make it ideal for portability.
|
|
Table Retention Device
The cutting table is equipped with a spring lock to secure the cutting table when transporting the saw in between job sites.
|
|
LCBH
The patented LCBH (Liquid Cooled Bearing Housing) works in conjunction with the water pump to cool down the bearing housing during saw operation. This feature increases the service life of the bearing housing even under heavy loads.
|
|
Rubber Matted Cutting Table
The new cast aluminum cutting tables are covered by a rubber mat that is injected directly onto the table and chemically bond for ehanced durability.
|
|
|
|
|
|
Saws
Blades
Contact Info
Policy
About Us
Literature
Go Back to the Top
SDT-710SR
SDT-700ST2
SDT-710SR / SDT-700SR Owner's Manual
;){kind=link}